Disturbances from metal objects — Signal strength is too low

¿Qué significa Disturbances from metal objects ?

Interference from nearby metal objects, buried cables, or improper boundary wire installation is preventing the mower from detecting the loop signal. This message appears in the Automower Connect app.

• Metal objects like fences or steel reinforcement are too close.
• Buried cables are interfering with the signal.
• Boundary wire is not connected correctly to the charging station.
• Boundary wire is crossed on its way to an island.
• Boundary wire is broken.

Haga clic en los pasos para seguir su progreso.

1. 1

   For wire installation: Move the boundary wire or create more islands to improve signal strength.

2. 2

   For EPOS installation: Reposition the charging station.

3. 3

   Check that boundary wire connectors are properly attached to the charging station.

4. 4

   Verify the boundary wire is installed correctly and not crossed.

5. 5

   If the boundary wire is broken, find and replace the damaged section using an original coupler.