Outside working area — Mower detects it's outside boundaries

¿Qué significa Outside working area ?

The robot mower's display shows 'Outside working area', indicating it cannot detect the boundary wire signal or is positioned outside its defined work area. This can be caused by installation errors or external interference.

• Boundary wire connections crossed at the charging station
• Boundary wire too close to the edge of the work area
• Work area slope too steep near the boundary loop
• Boundary wire laid incorrectly around an island
• Interference from metal objects or buried cables nearby
• Interference from another nearby product installation

Haga clic en los pasos para seguir su progreso.

1. 1

   Check the boundary wire connections at the charging station to ensure they are not crossed.

2. 2

   Verify the boundary wire is laid according to the manual's instructions (refer to page 19).

3. 3

   If metal objects or buried cables are suspected, try moving the boundary wire slightly.

4. 4

   Place the product in the charging station and generate a new loop signal.

5. 5

   Review the work area for excessive slopes near the boundary loop if the issue persists.