Error Code 10 — Defrost sensor fault

¿Qué significa 10 ?

There is an electrical failure with the sensor that monitors the outdoor coil temperature during the defrost cycle. This sensor is connected to the PCB.

• Defective defrost sensor
• Loose or damaged sensor wiring
• Open or shorted sensor circuit

Haga clic en los pasos para seguir su progreso.

1. 1

   Check that the sensor wiring is firmly and correctly connected to Plug CN-14 on the PCB.

2. 2

   Inspect the sensor wiring for any damage.

3. 3

   Test the sensor's resistance against the values in the manual's reference section.

4. 4

   Replace the sensor if it is found to be faulty.