¿Qué provoca el error Wash and Rinse lights blinking de GE Appliances?

Water supply valves are turned off.. Recent installation or return from vacation.

¿Cómo se corrige el código de falla Wash and Rinse lights blinking de GE Appliances?

1. Check that both hot and cold water supply valves are fully open. 2. Wait for the 4-minute lock-out period to pass. 3. Attempt to start the cycle again. 4. If the issue persists, unplug the washer, wait 30 seconds, plug it back in, and try starting a cycle.

Wash and Rinse lights blinking

Wash and Rinse lights blinking — Water not entering washer

GE Appliances · Washer and Dryer GUV27 and GUD24 Series

¿Qué significa Wash and Rinse lights blinking ?

The washer is not detecting water entering the drum. This could be due to the water supply being turned off or a delay in water flow after installation or a vacation.

Causas comunes

Water supply valves are turned off.
Recent installation or return from vacation.

Pasos de reparación & Lista de verificación

Haga clic en los pasos para seguir su progreso.

1
Check that both hot and cold water supply valves are fully open.
2
Wait for the 4-minute lock-out period to pass.
3
Attempt to start the cycle again.
4
If the issue persists, unplug the washer, wait 30 seconds, plug it back in, and try starting a cycle.

Ver todos los códigos en este manual (29)

Datos técnicos verificados. Última actualización: April 2026

Fallas relacionadas

Back and forth swoosh or light clickingBack and forth swoosh or light clicking during agitate — Motor reversing direction Basket seems looseBasket seems loose — Basket moves freely, no traditional brake Blinking Spin light or Spin light on at end of cycleBlinking Spin light or Spin light on at end of cycle — Out of balance condition detected

Fuente: GE Appliances Washer and Dryer GUV27 and GUD24 Series

Open Manual (Page 9)Buscar más códigos en este manual