¿Qué provoca el error Short spray and delay after pushing Start de GE Appliances?

Lid was opened and closed after cycle selection but before pressing Start.. Normal start-up sequence.

¿Cómo se corrige el código de falla Short spray and delay after pushing Start de GE Appliances?

1. This is a normal start-up sequence and does not require user action. 2. Ensure the lid is closed and press Start again if the cycle was paused. 3. Refer to the START-UP SEQUENCE in the Safety Instructions section for more details.

Short spray and delay after pushing Start

Short spray and delay after pushing Start — Lid opened and closed between cycle selection and start

GE Appliances · Washer and Dryer GUV27 and GUD24 Series

¿Qué significa Short spray and delay after pushing Start ?

The washer performs a short water spray and a brief delay after the Start button is pressed if the lid was opened and closed between selecting the cycle and starting it. This is part of the normal start-up sequence.

Causas comunes

Lid was opened and closed after cycle selection but before pressing Start.
Normal start-up sequence.

Pasos de reparación & Lista de verificación

Haga clic en los pasos para seguir su progreso.

1
This is a normal start-up sequence and does not require user action.
2
Ensure the lid is closed and press Start again if the cycle was paused.
3
Refer to the START-UP SEQUENCE in the Safety Instructions section for more details.

Ver todos los códigos en este manual (29)

Datos técnicos verificados. Última actualización: April 2026

Fallas relacionadas

Back and forth swoosh or light clickingBack and forth swoosh or light clicking during agitate — Motor reversing direction Basket seems looseBasket seems loose — Basket moves freely, no traditional brake Blinking Spin light or Spin light on at end of cycleBlinking Spin light or Spin light on at end of cycle — Out of balance condition detected

Fuente: GE Appliances Washer and Dryer GUV27 and GUD24 Series

Open Manual (Page 19)Buscar más códigos en este manual