BP — Start-up test bypassed

¿Qué significa BP ?

The 'BP' display means the start-up system check has been bypassed. This allows the unit to enter standby mode immediately after installation or power-up, skipping the automated diagnostic tests.

• User initiated bypass of the start-up system check

Haga clic en los pasos para seguir su progreso.

1. 1

   The unit is now in standby mode and can be used normally.

2. 2

   To bypass the test: within 5 seconds of applying power, set the indoor unit to Dry and 68°F (20°C) while 'CC' is displayed.

3. 3

   If the start-up test was not bypassed and the unit shows 'n2' or 'n3', power cycle and attempt bypass again.

4. 4

   The bypass is only possible before the 'n2' or 'n3' displays appear.