¿Qué provoca el error Unit does not receive signals from user interface de Daikin?

User interface batteries are low or dead. Signal transmitter is blocked or too far. Interference from fluorescent lights

¿Cómo se corrige el código de falla Unit does not receive signals from user interface de Daikin?

1. Check and replace the batteries in the user interface. 2. Ensure the user interface is not exposed to direct sunlight. 3. Make sure there are no electronic starter type fluorescent lamps in the room that might cause interference. 4. Contact your dealer if the problem persists.

Unit does not receive signals from user interface

Unit does not receive signals from user interface — Remote control lost

Daikin · room air conditioner

¿Qué significa Unit does not receive signals from user interface ?

The indoor unit is not responding to commands from the user interface remote control. This could be due to battery issues, signal blockage, or interference.

Causas comunes

User interface batteries are low or dead
Signal transmitter is blocked or too far
Interference from fluorescent lights

Pasos de reparación & Lista de verificación

Haga clic en los pasos para seguir su progreso.

1
Check and replace the batteries in the user interface.
2
Ensure the user interface is not exposed to direct sunlight.
3
Make sure there are no electronic starter type fluorescent lamps in the room that might cause interference.
4
Contact your dealer if the problem persists.

Ver todos los códigos en este manual (60)

Datos técnicos verificados. Última actualización: April 2026

Fallas relacionadas

4-way valve abnormality4-way valve abnormality — Refrigerant flow control issue A clapping sound is heardA clapping sound is heard — External device interfering Abnormal function during operation (lightning/radio waves)Abnormal function during operation — Interference suspected

Fuente: Daikin room air conditioner

Open Manual (Page 19)Buscar más códigos en este manual