DeLonghi Espresso Machines

The control panel is showing an alarm, indicating a condition that requires attention. More specific details can be found in the manual.

The machine has detected that it needs to be descaled. Descaling is important to remove mineral build-up and maintain optimal performance.

The machine is currently in the process of running a descaling cycle. This is a normal operational state during the descaling procedure.

The machine is currently operating in 'Energy Saving' mode, which helps reduce power consumption. This is a normal and intended operational state.

The machine is actively dispensing one or two cups of espresso coffee. This is a normal operational state after selecting your desired coffee.

The grounds container is full of spent coffee pucks and needs to be emptied before the machine can continue operation.

The grounds container (drip tray and spent coffee container) is not properly inserted into the machine or is completely missing.

The appliance is currently heating up or performing a rinse cycle. This is a normal operational status of the machine.

The machine is actively dispensing one or two cups of long coffee. This is a normal operational state after selecting your desired coffee.

The steam function has been selected, but the steam dial is not in the correct position or needs to be turned to initiate steam delivery.

The machine is ready for or actively using the steam function. This is a normal operational state when steam is needed.

The water level in the tank is too low for the machine to operate. It needs to be refilled before use.

The water tank is not properly inserted into the machine or is completely missing. The machine cannot operate without it.