Stops in working area — Obstacle or grass too long/dense

Was bedeutet Landroid stops in the working area ?

The Landroid has stopped working within its designated area. This is likely due to an obstacle in its path or grass that is too long or dense for its current settings.

• An obstacle is present in the Landroid's working area.
• The cutting height is set too low for the grass length or density.
• The grass is too long or dense for the mower's current settings.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Remove any obstacles from the Landroid's working area.

2. 2

   Raise the cutting height setting, then gradually lower it as needed.

3. 3

   Check if the grass is excessively long or dense, which might require multiple passes or a higher setting.

4. 4

   Ensure the boundary wire is correctly installed to keep the mower within its designated area.