Won't Run or Power Up — No power, connection issue, or control problem

Was bedeutet Won't Run or Power Up ?

The dishwasher does not respond to controls, has no power, or shows no lights. This is typically a power supply issue, a loose connection, or a faulty user interface or control board.

• No power to the unit (check breaker/fuse)
• Bad connection at the junction box
• Loose connections in power-up circuit or between keypad and control
• Incompatible control board for LCD display models
• Door switch problem
• Faulty user interface or control board

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Check the circuit breaker or fuses for the dishwasher and ensure they are not tripped or blown.

2. 2

   Verify power supply connections at the junction box.

3. 3

   Unplug dishwasher or disconnect power.

4. 4

   Check continuity of power connections to the control and connections between the keypad(s) and control.

5. 5

   Inspect the control power connector (P4) and adjacent PC board in the door area for damage. Replace if needed.

6. 6

   If the drain motor turns on during diagnostics, replace the UI; otherwise, replace the control.