CodeRegistry
Marken
  1. Startseite
  2. Whirlpool
  3. Diagnostic Mode
  4. Some buttons do not light indicators
About·Privacy·Terms

CodeRegistry — Ihre globale Bibliothek für technische Lösungen.

Zu Ihrer Sicherheit: Befolgen Sie immer die offiziellen Herstellerhandbücher. CodeRegistry ist unabhängig und steht in keiner Verbindung zu den genannten Marken.

Some buttons do not light indicators

Some buttons do not light indicators - HMI fault

Whirlpool · Diagnostic Mode

Was bedeutet Some buttons do not light indicators ?

Individual buttons on the control panel are not lighting up as expected. This suggests a specific issue with the Human-Machine Interface (HMI).

Häufige Ursachen

  • HMI not properly seated
  • HMI fault

Reparaturschritte & Checkliste

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

  1. 1

    Unplug the washer or disconnect power.

  2. 2

    Ensure the HMI and housing assembly is properly inserted into the front console.

  3. 3

    Replace the HMI and housing assembly.

Alle Codes in diesem Handbuch durchsuchen (51)
Verifizierte technische Daten. Zuletzt aktualisiert: April 2026

Verwandte Fehlercodes

888 or 88Display Shows 888 or 88 — No Saved Fault CodesACU Power Check FailACU Power Check Failure — Power or Connection IssueClean Washer LED flashing at end of wash cycleClean Washer LED Flashing — Reminder to Run Clean Cycle
Quelle: Whirlpool Diagnostic Mode
Open Manual (Page 14)Mehr Codes in diesem Handbuch suchen