Ground Current – RCD — Internal hardware error

Was bedeutet 124 ?

An internal hardware error is preventing the RCD sensor from functioning correctly. This sensor monitors for ground faults.

• Internal hardware failure related to RCD sensing
• Faulty RCD sensor component

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Power Cycle: Turn off your inverter's AC disconnect switch and the main breaker for your solar system. Wait 5 minutes, then turn them back on.

2. 2

   Cable Check: Visually inspect all external cables connected to the inverter. Ensure they are securely plugged in and show no signs of damage.

3. 3

   App & LED Status: Check your SolarEdge monitoring app for any updated error messages. Also, consult your inverter's manual to understand what its indicator lights are showing.

4. 4

   Breaker Check: Ensure all AC and DC breakers associated with your solar system (typically near your main electrical panel or inverter) are in the 'ON' position.

5. 5

   Contact Professional: If the 'Ground Current – RCD — Internal hardware error' persists after trying these steps, please contact your original installer or SolarEdge support for professional assistance.