CodeRegistry
Marken
  1. Startseite
  2. Samsung
  3. Intesis Home Automation
  4. 153
About·Privacy·Terms

CodeRegistry — Ihre globale Bibliothek für technische Lösungen.

Zu Ihrer Sicherheit: Befolgen Sie immer die offiziellen Herstellerhandbücher. CodeRegistry ist unabhängig und steht in keiner Verbindung zu den genannten Marken.

153

Error 153 — Floating switch of indoor unit (2nd detection)

Samsung · Intesis Home Automation

Was bedeutet 153 ?

The indoor unit's floating switch, which detects condensate overflow, has triggered for a second time. This indicates a persistent problem with the condensate drain system.

Häufige Ursachen

  • Clogged condensate drain line
  • Faulty float switch
  • Condensate pump failure (if applicable)
  • Improper installation causing water buildup

Reparaturschritte & Checkliste

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

  1. 1

    Turn off the indoor unit immediately to prevent potential water damage.

  2. 2

    Check the condensate drain pan for standing water and inspect the drain line for clogs.

  3. 3

    Clear any blockages found in the drain line using a wet/dry vacuum or by flushing with water (if safe).

  4. 4

    Ensure the float switch is moving freely and is not stuck in the 'up' position.

  5. 5

    Restore power once the issue is resolved. If the problem persists, the switch or pump may need replacement.

Alle Codes in diesem Handbuch durchsuchen (60)
Verifizierte technische Daten. Zuletzt aktualisiert: April 2026

Verwandte Fehlercodes

101Error 101 — Indoor unit communication error102Error 102 — Communication error between indoor and outdoor unit108Error 108 — Repeated address setting
Quelle: Intesis Home Automation
Open Manual (Page 22)Mehr Codes in diesem Handbuch suchen