CodeRegistry
Marken
  1. Startseite
  2. Samsung
  3. Intesis Home Automation
  4. 152
About·Privacy·Terms

CodeRegistry — Ihre globale Bibliothek für technische Lösungen.

Zu Ihrer Sicherheit: Befolgen Sie immer die offiziellen Herstellerhandbücher. CodeRegistry ist unabhängig und steht in keiner Verbindung zu den genannten Marken.

152

Error 152 — Closed EEV of indoor unit (2nd detection)

Samsung · Intesis Home Automation

Was bedeutet 152 ?

The Electronic Expansion Valve (EEV) in the indoor unit is detected as being closed when it should be open or regulating. This is a confirmed issue, restricting refrigerant flow and proper operation.

Häufige Ursachen

  • Faulty EEV valve
  • Control system malfunction preventing EEV opening
  • Blockage in the refrigerant line
  • Electrical fault to the EEV

Reparaturschritte & Checkliste

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

  1. 1

    Perform a full power cycle of the HVAC system by cutting power at the circuit breaker.

  2. 2

    Allow the unit to remain unpowered for several minutes to ensure a complete reset.

  3. 3

    Switch the power back on and monitor the system for normal operation.

  4. 4

    If the EEV remains closed, it could indicate an electrical or mechanical failure of the valve or a related component.

  5. 5

    Contact a qualified HVAC technician, as this fault requires specialized diagnostic tools and expertise.

Alle Codes in diesem Handbuch durchsuchen (60)
Verifizierte technische Daten. Zuletzt aktualisiert: April 2026

Verwandte Fehlercodes

101Error 101 — Indoor unit communication error102Error 102 — Communication error between indoor and outdoor unit108Error 108 — Repeated address setting
Quelle: Intesis Home Automation
Open Manual (Page 22)Mehr Codes in diesem Handbuch suchen