CodeRegistry
Marken
  1. Startseite
  2. Samsung
  3. Intesis Home Automation
  4. 151
About·Privacy·Terms

CodeRegistry — Ihre globale Bibliothek für technische Lösungen.

Zu Ihrer Sicherheit: Befolgen Sie immer die offiziellen Herstellerhandbücher. CodeRegistry ist unabhängig und steht in keiner Verbindung zu den genannten Marken.

151

Error 151 — Opened EEV of indoor unit (2nd detection)

Samsung · Intesis Home Automation

Was bedeutet 151 ?

The Electronic Expansion Valve (EEV) in the indoor unit is detected as being open when it should be closed or regulating. This is a confirmed issue, preventing proper refrigerant control.

Häufige Ursachen

  • Malfunctioning EEV valve
  • Control board issue affecting EEV operation
  • Refrigerant pressure imbalance
  • Faulty EEV motor or sensor

Reparaturschritte & Checkliste

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

  1. 1

    Power off the entire HVAC system at the main circuit breaker.

  2. 2

    Wait for a few minutes (at least 5-10 minutes) for the system to fully reset.

  3. 3

    Restore power and observe if the error clears and the system operates normally.

  4. 4

    If the error persists, there may be a mechanical or electrical fault with the EEV or its control.

  5. 5

    This issue typically requires diagnosis and repair by a certified HVAC technician.

Alle Codes in diesem Handbuch durchsuchen (60)
Verifizierte technische Daten. Zuletzt aktualisiert: April 2026

Verwandte Fehlercodes

101Error 101 — Indoor unit communication error102Error 102 — Communication error between indoor and outdoor unit108Error 108 — Repeated address setting
Quelle: Intesis Home Automation
Open Manual (Page 22)Mehr Codes in diesem Handbuch suchen