CodeRegistry
Marken
  1. Startseite
  2. MHI
  3. R410A Systems
  4. U2
About·Privacy·Terms

CodeRegistry — Ihre globale Bibliothek für technische Lösungen.

Zu Ihrer Sicherheit: Befolgen Sie immer die offiziellen Herstellerhandbücher. CodeRegistry ist unabhängig und steht in keiner Verbindung zu den genannten Marken.

U2

U2 - Abnormal high discharging temperature or inner thermostat (49C) operation in outdoor unit

MHI · R410A Systems

Was bedeutet U2 ?

This error indicates that the outdoor unit is experiencing an abnormally high discharge temperature, or the inner thermostat (49C) has activated as a safety measure.

Häufige Ursachen

  • Insufficient refrigerant charge (low refrigerant).
  • Dirty outdoor coil restricting airflow.
  • Malfunctioning outdoor fan.
  • Clogged or restricted refrigerant lines.
  • Faulty discharge temperature sensor or inner thermostat.

Reparaturschritte & Checkliste

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

  1. 1

    Check the outdoor unit for any obstructions blocking airflow to the coil. Clear any debris.

  2. 2

    Ensure the outdoor fan is running freely and not obstructed.

  3. 3

    Turn off the unit at the circuit breaker, wait 30 seconds, and turn it back on to reset.

  4. 4

    If the problem persists, contact a qualified HVAC technician to check refrigerant levels and sensor operation.

Alle Codes in diesem Handbuch durchsuchen (58)
Verifizierte technische Daten. Zuletzt aktualisiert: April 2026

Verwandte Fehlercodes

E0E0 - Transmitting/receiving signal error in indoor unitE12E12 - Address setting conflict or auto address failureE14E14 - 3 flashes - Master/slave system wiring or SW settings error
Quelle: MHI R410A Systems
Open Manual (Page 1)Mehr Codes in diesem Handbuch suchen