CodeRegistry
Marken
  1. Startseite
  2. MHI
  3. R410A Systems
  4. E34
About·Privacy·Terms

CodeRegistry — Ihre globale Bibliothek für technische Lösungen.

Zu Ihrer Sicherheit: Befolgen Sie immer die offiziellen Herstellerhandbücher. CodeRegistry ist unabhängig und steht in keiner Verbindung zu den genannten Marken.

E34

E34 - Abnormally low current or L3 open phase detected in outdoor unit

MHI · R410A Systems

Was bedeutet E34 ?

This error indicates that abnormally low current or no current has been detected by the current transformer (CT) on L3, or an open phase on L3's secondary side of the contactor.

Häufige Ursachen

  • Loss of power on the L3 phase.
  • Faulty current transformer (CT) on L3.
  • Loose or disconnected L3 wiring on the secondary side of the contactor.
  • Compressor not drawing sufficient current.

Reparaturschritte & Checkliste

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

  1. 1

    Turn off the main power supply to the air conditioning system at the circuit breaker.

  2. 2

    Have a qualified electrician inspect the L3 phase wiring, the current transformer (CT), and the contactor in the outdoor unit.

  3. 3

    Check for any loose connections or damaged wiring.

  4. 4

    Restore power only after the professional has diagnosed and corrected the electrical issue.

Alle Codes in diesem Handbuch durchsuchen (58)
Verifizierte technische Daten. Zuletzt aktualisiert: April 2026

Verwandte Fehlercodes

E0E0 - Transmitting/receiving signal error in indoor unitE12E12 - Address setting conflict or auto address failureE14E14 - 3 flashes - Master/slave system wiring or SW settings error
Quelle: MHI R410A Systems
Open Manual (Page 3)Mehr Codes in diesem Handbuch suchen