E0 - Product not wired correctly (F9)

Was bedeutet E0 ?

This error indicates an issue with how the oven is electrically wired to the house power supply, potentially an incorrect neutral connection or phase wiring.

• Incorrect house wiring to the product.
• Neutral connection switched with L1 or L2.
• Improper installation of the oven.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Turn off the oven power at the circuit breaker, wait 10 seconds, then turn it back on.

2. 2

   Enter Diagnostics mode by pressing CANCEL>CANCEL>START, then press the 3 or 6 keypad to scroll to the Faults screen and verify the E0 error code.

3. 3

   Run a cooking function to see if the error clears and operation becomes normal.

4. 4

   Consult the oven's installation instructions to verify the proper electrical connections for your model, paying close attention to neutral, L1, and L2 connections.

5. 5

   If the error persists, immediately contact a qualified electrician to inspect the house wiring to the oven. Do not operate the oven until this issue is resolved.

6. 6

   Clear the error codes from the Diagnostics Menu by pressing CLOCK/TOOLS, then START, if the issue resolves.