Long drain error (implied) - Drain system obstruction or sensor issue

Was bedeutet Long drain error (implied) ?

This error occurs if the washer takes too long to drain. Common causes include drain hose issues, siphon effects, or problems with the water level sensor system.

• Drain hose inserted too far into the standpipe
• Drain hose kinked or obstructed
• Pinhole air leak in the pressure switch hose
• Obstructed drain pump
• Faulty water level sensor (pressure sensor)

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Ensure the end of the drain hose is no more than 4.5 inches down into the standpipe.

2. 2

   Check the drain hose for kinks, twists, or visible obstructions.

3. 3

   Inspect the pressure switch hose for pinhole leaks, kinks, or obstructions.

4. 4

   Clear any visible obstructions from the drain pump.

5. 5

   After fixing the issue, perform a calibration and test the washer.