CodeRegistry
Marken
  1. Startseite
  2. husqvarna
  3. Automower Technical Manual
  4. The Automower works at the wrong time
About·Privacy·Terms

CodeRegistry — Ihre globale Bibliothek für technische Lösungen.

Zu Ihrer Sicherheit: Befolgen Sie immer die offiziellen Herstellerhandbücher. CodeRegistry ist unabhängig und steht in keiner Verbindung zu den genannten Marken.

The Automower works at the wrong time

The Automower works at the wrong time — Mower operating schedule is incorrect

husqvarna · Automower Technical Manual

Was bedeutet The Automower works at the wrong time ?

This symptom occurs when the Automower is mowing at times other than programmed. This could be due to an incorrectly set internal clock or incorrect start/stop time settings.

Häufige Ursachen

  • The clock on the Automower needs to be set.
  • Start and stop times for mowing are incorrect.
  • The battery in the control box may need to be replaced.

Reparaturschritte & Checkliste

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

  1. 1

    Set the clock on the Automower to the correct time.

  2. 2

    Adjust the start and stop time settings for mowing as required.

  3. 3

    If time settings repeatedly reset, the battery in the control box may need to be replaced (see page 96).

  4. 4

    Verify any schedule overrides or temporary settings in the app.

  5. 5

    Ensure no external timers or conflicting schedules are active.

Alle Codes in diesem Handbuch durchsuchen (37)
Verifizierte technische Daten. Zuletzt aktualisiert: April 2026

Verwandte Fehlercodes

Automower runs at an angle or in an arcAutomower runs at an angle or in an arc — Tilt sensor calibration or defectBlade motor defectBlade motor defect or Blade disc blocked — Blades cannot rotate freelyBoth the mowing and charging times are shorter than usualBoth the mowing and charging times are shorter than usual — High temperatures or low battery capacity
Quelle: Husqvarna Automower Technical Manual
Open Manual (Page 109)Mehr Codes in diesem Handbuch suchen