No contact in charging station — Mower not making proper charging connection

Was bedeutet No contact in charging station ?

The Automower is in the charging station but cannot establish proper contact for charging, possibly due to alignment issues, dirty contacts, or damaged cables.

• Poor contact between charging strips and contact strips.
• Charging station leans or charging plate is bent.
• Poor contact between the charging cable’s cable lugs and the charging strips.
• Poor contact between flat-pin connectors and charging station contact strips.
• Charging cable connector on the chassis is defective.
• Control box on the Automower is defective.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Let the Automower dock itself by pressing 'Home' and check that the charging strips and contact strips make good contact.

2. 2

   Check that the charging station does not lean and the charging plate is not bent.

3. 3

   Check the charging current with the Quick check function (hold 0 key for 2 seconds).

4. 4

   Check the charging cable’s cable lugs for corrosion and file off any found; replace the entire charging cable assembly if necessary.

5. 5

   Lift the cover on the charging station, check the flat-pin connector connections, and change if defective.

6. 6

   Check that the contact strips on the charging station are not jammed and clean any dirt. Lubricate with copper paste.