Front loop sensor defect — Front loop sensor cable or card is faulty

Was bedeutet Front loop sensor defect ?

This indicates a problem with the front loop sensor, which can be due to damaged cabling, a loose connection, or a defective sensor card itself. It affects the mower's ability to detect the boundary wire at the front.

• Cabling to the front loop sensor is defective or has come loose.
• Front loop sensor card is defective.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Check the levels for Af and Ar via Quick check (Press and hold '0' for 2 seconds) and switch with YES button.

2. 2

   If Af is 0 and Ar is higher than 70 (when mower is outside charging plate, but inside loop) or Quality is lower than 100%, inspect the cabling to the front loop sensor for damage or looseness.

3. 3

   Ensure all connections to the front loop sensor are secure and undamaged.

4. 4

   If cabling is undamaged and the values still indicate a defect, the front loop sensor card may need replacement.

5. 5

   Contact service if you suspect a defective sensor card.