CodeRegistry
Marken
  1. Startseite
  2. husqvarna
  3. Automower 310/315/315x
  4. Short mowing/charging times
About·Privacy·Terms

CodeRegistry — Ihre globale Bibliothek für technische Lösungen.

Zu Ihrer Sicherheit: Befolgen Sie immer die offiziellen Herstellerhandbücher. CodeRegistry ist unabhängig und steht in keiner Verbindung zu den genannten Marken.

Short mowing/charging times

Short mowing and charging times — Reduced battery performance or operational setting issues

husqvarna · Automower 310/315/315x

Was bedeutet Short mowing/charging times ?

The robot mower's operational and charging durations are noticeably shorter than their usual lengths. This can indicate battery wear, incorrect settings, or environmental factors affecting the battery.

Häufige Ursachen

  • Worn-out or spent battery
  • Mower is in a standby period
  • START button not pushed after closing the hatch
  • Parking mode is activated
  • Battery temperature is too high or too low

Reparaturschritte & Checkliste

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

  1. 1

    Check the mower's battery health. If it's old or showing signs of degradation, consider replacing the battery (refer to page 41).

  2. 2

    If the mower is parked for extended periods, check its schedule and standby settings (page 37) to ensure it's not intentionally idle.

  3. 3

    After placing the mower in the charging station and closing the hatch, ensure you press the START button and confirm with your PIN code.

  4. 4

    Verify the mower's operating mode (page 36). If it's in parking mode, change it to a suitable mowing mode.

  5. 5

    Ensure the charging station is located in a shaded area, protected from direct sunlight or extreme temperatures, which can affect battery performance.

Alle Codes in diesem Handbuch durchsuchen (17)
Verifizierte technische Daten. Zuletzt aktualisiert: April 2026

Verwandte Fehlercodes

Blue flashing lightBlue flashing light — Boundary loop disconnected or brokenConnection NOT changedConnection NOT changed — Failed to update loop signalCutting system blockedCutting system blocked — Blade disc obstructed or waterlogged
Quelle: Husqvarna Automower 310/315/315x
Open Manual (Page 51)Mehr Codes in diesem Handbuch suchen