Outside working area — Mower detects it is outside the defined boundary

Was bedeutet Outside working area ?

The mower's display shows a message indicating it has exited the designated working area. This can be caused by incorrect boundary wire setup, signal interference, or issues with the wire itself.

• Boundary wire connections to the charging station are crossed
• Boundary wire is too close to the work area edge
• Work area slopes excessively near the boundary loop
• Boundary wire laid incorrectly around an island
• Interference from nearby metal objects or buried cables
• Signal confusion from another nearby Husqvarna Automower installation

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Verify the boundary wire is connected correctly to the charging station terminals, ensuring no wires are crossed.

2. 2

   Check the boundary wire placement to ensure it meets the recommended distance from the edge of the work area.

3. 3

   Inspect the boundary wire path for any excessively steep slopes. Adjust the wire if necessary.

4. 4

   If you have islands, confirm the boundary wire is laid in the correct direction around them.

5. 5

   If interference is suspected, try moving the boundary wire slightly away from metal objects or other cables.

6. 6

   Place the mower in the charging station and generate a new loop signal through the mower's menu.