Outside working area — Interference or incorrect routing

Was bedeutet Outside working area ?

The mower is reporting it is outside the designated working area. This can be due to external interference or incorrect boundary wire placement.

• Interference from metallic objects nearby (fences, rebar).
• Buried metallic cables in the vicinity.
• The boundary wire is routed incorrectly around an island feature.
• The working area slopes too much.
• The boundary wire is too close to the edge of the working area.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Try moving the boundary wire further away from potential sources of interference.

2. 2

   Ensure the boundary wire is routed correctly around any islands.

3. 3

   Verify the boundary wire is installed at the correct distance from the edges of the lawn.

4. 4

   Check the installation instructions for proper boundary wire routing on slopes.