No loop signal — Boundary wire not detected

Was bedeutet No loop signal ?

This fault indicates that the Automower cannot detect the boundary wire signal. This wire is essential for the mower to know the limits of the working area.

• Boundary wire is broken or damaged.
• The boundary wire loop is not properly connected to the charging station.
• The charging station is not powered or is faulty.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Check that the charging station is plugged in and powered on.

2. 2

   Verify the boundary wire connections at the charging station are secure.

3. 3

   Inspect the boundary wire for visible breaks or damage along its entire length.

4. 4

   Use a multimeter to check for continuity in the boundary wire if possible.