Yellow ALERT LED 8 flashes — Welded contactor

Was bedeutet ALERT LED 8 flashes Yellow ?

The compressor contactor has failed in the closed position, meaning the compressor will always run when power is supplied, regardless of the thermostat demand.

• Compressor contactor has failed closed.
• Thermostat demand signal is not properly connected to the module.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Turn off unit power supply and install a lockout tag.

2. 2

   Inspect the compressor contactor to see if it is stuck closed.

3. 3

   Verify the thermostat demand signal (Y) is correctly connected to the module.

4. 4

   Check that the 24VAC is present across Y and C when the thermostat demands operation.