Blocking fault 6/l/ (2/2/9) - Insufficient ionization current during operating phase

What does 6/l/ mean?

The system has detected an insufficient ionization current while the burner should be operating normally. This means the flame is not stable or has gone out during operation. This is a blocking fault, requiring a manual reset.

• Unstable gas supply
• Dirty burner
• Faulty electrode
• Poor combustion

Click steps to track your progress.

1. 1

   Press the 'Reset' button on the BC10 basic controller.

2. 2

   Ensure the gas supply to the boiler is consistent and not interrupted.

3. 3

   If the fault persists, contact a qualified service technician to inspect the burner and gas supply components.