CodeRegistry
Brands
  1. Home
  2. Bosch
  3. Heat Pumps
  4. 5367
About·Privacy·Terms

CodeRegistry — Your global library for technical solutions.

For your safety: always follow the equipment manufacturer’s official manuals. CodeRegistry is an independent help site and is not affiliated with the brands listed here.

5367

5367 - Bosch Heat Pump Z1 low overheating alarm

Bosch · Heat Pumps

What does 5367 mean?

This alarm indicates that Bosch Heat Pump zone 1 is experiencing conditions of low overheating. It triggers after 3 warnings in 3 hours, or if a warning is active for 30 minutes.

Common Causes

  • The valve motor is not correctly installed or operating.
  • The expansion valve motor is defective.
  • The expansion valve VR1 is open too much or stuck in an open position.

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Check the valve motor for correct installation and ensure valves open and close in the correct order.

  2. 2

    Activate the 'test outdoor unit' function through your Heat Pump's settings or app.

  3. 3

    If repeated warnings occur, contact a qualified technician to check the expansion valve motor and valve VR1 for proper operation.

Browse all codes in this manual (60)
Verified technical data. Last updated: April 2026

Related Faults

5203Alarm Outdoor sensor TL1 faulty5206Alarm Flow sensor T0 faulty5209Alarm Z1 heat transfer fluid out sensor TC1 faulty
Source: Bosch Heat Pumps
Open Manual (Page 6)Search more codes in this manual